基于均一化观测序列的成山头海表温度气候变化特征分析     

邹曙光  刘李钊  邹琰 《海洋技术学报》2019,38(6):51-55

文中利用加拿大环境部气候研究中心研发的惩罚最大t检验方法,选取均一的邻近气象站为参考站,结合元数据信息,对1960-2017年成山头海洋站海表温度序列进行了均一性检验与订正。利用订正后的海表温度序列对成山头海温气候变化特征进行分析。结果表明,订正前后年平均海表温度趋势发生了明显改变,表现出海温上升趋势较订正前加强的特征,增暖趋势由订正前的0.04℃/10 a上升到0.15℃/10 a,其中最暖的5个年份多发生在1980年以后,分别为1973年、1989年、2002年、2007年和2017年。海表温度总体呈显著上升趋势和明显的年代际波动,20世纪60年代至80年代末为偏冷阶段,之后开始增暖,20世纪90年代至今为偏暖阶段。1960-2017年,成山头的海温突变点在1987年,是一次增暖性突变,与中国大陆的气温突变特征和气温变化阶段性特征非常一致。  相似文献   

海上风电升压站平台高程确定标准的合理性研究     

潘晓春 《海洋技术学报》2019,38(6):83-88

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究     

房成贺  陈俊平  兰孝奇  张磊 《大地测量与地球动力学》2019,39(2):169-177

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法，针对北斗单系统实时建立电离层延迟格网的不足，提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网，并利用北斗单频单点伪距定位进行精度验证。结果表明，在有效格网点覆盖充足的地区，BDS与GPS实时电离层延迟格网定位效果相当；而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数，也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。  相似文献   

Obtaining the distribution of quiescent periods directly from the power spectral densities of Sea waves     

《Applied Ocean Research》2019

There is a growing practical interest in the ability to increase the sea states at which marine operations can be safely undertaken by exploiting the quiescent periods that are well known to exist under a wide range of sea conditions. While the actual prediction of quiescent periods at sea for the control of operations is a deterministic process, the long term planning of future maritime tasks that rely on these quiescent periods is a statistical process involving the anticipated quiescence properties of the forecasted sea conditions in the geographical region of interest. It is in principle possible to obtain such data in tabular form either large scale simulation or from field data. However, such simulations are computationally intensive and libraries of appropriate field data are not common. Thus, it is clearly attractive to develop techniques that exploit standard wave spectral models for describing the quiescence statistics directly from such spectra. The present study focuses upon such techniques and is a first step towards the production of a computationally low-cost quiescence prediction tool and compares its efficacy against simulations. Two significant properties emerge for a large class of wave spectral models that encompasses the ubiquitous Neumann and Pierson Moskowitz or Bretschneider forms. Firstly, the auto-correlation function of the wave profile that are required to produce the quiescence property can be obtained analytically in terms of standard special functions. This considerably reduces the computational cost making desktop computer-based planning tools a reality. Secondly, for each class of these parametric spectra, the probability of a given number of consecutive wave heights (normalised to the significant wave heights) less than some critical value is in fact independent of absolute wave height. Thus, for a broad class of practically interesting wave spectra all that is required to obtain the statistical distribution of the quiescent periods is simple rescaling.  相似文献   

碳氮稳定同位素比值在潮间带大型底栖动物组织间差异性研究   总被引：1，自引：1，他引：0  

刘博  陈琳琳  李宝泉  侯西勇  冯光海  李晓炜  李秉钧  王玉珏 《海洋学报》2019,41(4):74-82

近年来，稳定同位素技术已被广泛应用于食物网研究中。然而，生物样品取样部位对食物网构建的影响的研究相对少见。大型底栖动物作为潮间带食物网的重要组成部分，在食物网研究中有必要对其采样部位进行统一，以增加研究结果的准确性及可比较性。本研究选取黄河三角洲和烟台潮间带10种代表性的大型底栖动物，比较δ13C和δ15N在不同采样部位中的差异。结果显示，对于大多数底栖动物而言，采样部位将直接影响到δ13C和δ15N的测定结果。当底栖动物作为摄食者，需分析其食性和营养级时，应统一采用肌肉组织，如贝类的闭壳肌或足部肌肉，蟹类的鳌足肌肉，鱼类的背部肌肉；当底栖动物作为被摄食者，需分析次级消费者的食性和营养级时，除多毛类采用去除消化道内容物的体壁外，其他种类应选取整体（难以被消化的组织除外），如贝类的软体部，蟹类肌肉与鳃等的混合组织。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Responding to Global Warming: Mitigation Policies and Actions of Stakeholders in China’s Tourism Industry     

FENG Ling  CHEN Da  GAO Shan  WANG Yongzhi  TANG Chengcai 《资源与生态学报(英文版)》2019,10(1):94-103

China’s tourism industry has witnessed rapid progress in recent years, and is now an important part of global tourism in dealing with climate change. Within a framework of Pressure-State-Response (PSR), this paper focuses on the emission reduction pressure, carbon emission status, and responses of stakeholders in China’s tourism industry. Findings include: 1) The central government’s strategy and rapid growth of the industry scale exert rising pressure on China’s tourism to reduce carbon emissions. 2) Carbon emissions of China's tourism account for 13%-14.6% of global tourism, and about 3% of China’s emissions overall. Chinese tourists’ per capita carbon emission is lower than half of the global level. 3) The Chinese government attaches great importance to energy-saving and carbon emission reduction. In the tourism industry, documents, standards and other regulative measures have been issued to ensure that business practitioners set up green operational and managerial systems. In the field of tourism transportation, China's high-speed rail, new energy vehicles, and urban shared bicycles, have developed very rapidly in recent years, and they have effectively reduced the carbon emissions in traveling. Furthermore, this paper finds that Chinese tourists already have awareness and willingness for low-carbon tourism.  相似文献   

Experimental study on a sampling technique based on a freeze-sediments valve for deep-sea microorganism     

《Applied Ocean Research》2019

Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future.  相似文献   

基于GIS的“一带一路”地区气温插值方法比较研究     

杨艳昭  郎婷婷  张超  贾琨 《地球信息科学学报》2020,22(4):867-876

“一带一路”倡议是新时期中国为加强对外开放提出的全球化合作倡议,资源环境的优化配置对全球化发展意义重大。气温作为重要的基础数据和输入要素,对其进行空间化处理是实现大尺度区域资源环境优化配置的前提。本文基于地理信息技术（GIS）,运用距离平方反比法（IDS）、协同克里格法（CK）、回归距离平方反比法（RIDS）和回归协同克里格法（RCK）,对“一带一路”地区1980—2017年的2679个气象站点的月平均气温和年平均气温数据进行插值,获得了“一带一路”地区10 km分辨率的气温空间分布数据。交叉验证结果表明：① IDS、CK、RIDS和RCK插值法在整体上均较好地展示了“一带一路”地区气温的地理空间分布规律,4种插值方法的月均气温的均方根误差分别在1.93~2.43、1.78~2.14、1.31~2.23和1.23~1.92 ℃之间;年均气温的均方根误差分别为1.94、1.83、1.37和1.27 ℃;② 在“一带一路”地区,加入协变量分析的CK插值精度整体优于IDS,并且削弱了IDS的极值现象;③ RIDS和RCK对年均气温的插值精度分别较IDS和CK提高了29.4%和30.6%,表明加入地理要素并进行残差修正的插值精度得到了进一步提高。总体来看,RCK插值法对气温数据的插值精度最高,可以考虑将此方法作为“一带一路”地区温度等气象要素的插值方法。  相似文献